 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| POWER FILM RESISTORS TO 140 WATT RESISTORS CAPACITORS COILS DELAY LINES MP SERIES RoHS Term.W is RoHS compliant & 260C compatible D M 1 0 R P247 01 % RC MP D 1K 2 2 0 1% RC MP D 1 K 126 1% RC MP D 2 1K 2 0 G 1% RC MP D 1K 2 2 0 1% RC D Industry's widest range of TO-style power resistors! Standard resistance range: 0.01 to 56K Standard tolerance: 1%, 2%, 5% (available to 0.025%) Non-Inductive performance Resistor is electrically isolated from the mounting surface High Performance Molded Heat-Sink Resistors RCD's MP series feature power film resistor elements designed for excellent environmental stability as well as superior highfrequency performance (custom designs up to 1GHz avail.). All sizes feature metal base plate for optimum heat transfer. The resistor is electrically isolated from the metal tab, and molded into various package styles with high-temp flame retardant epoxy. MP126 and MP220 in reduced wattage ratings now available in tighter TCs and tolerances from 10 to 49.9K: MP126 (5W) to 0.025% and 2ppm, MP220 (10W) to 0.05% and 5ppm. OPTIONS Option P: Increased pulse capability Option G: Gull-wing lead formation for surface mounting Option B: Increased power design Numerous design modifications are available (special marking, custom lead wires, burn-in, etc). MP126 .335 [8.5] .15 [3.8] MP220, MP220B .12 [3.1] .472 [12] .40 [10.2] .06 [1.5] .117[3] .142 [3.6] .590 [15] MPD220 .40 [10.2] MP247 .06 [1.5] .400 [10.2] .63 [16] .20 [5.1] .122 [3.1] .19 [4.8] .800 .125 [3.2] .400 [10] .024 [.6] .10 .16 [4] [2.5] .200 [5.08] .020[.5] .030 [.76] .200 [5.08] .177[4.5] .10[2.5] .400 [10] .020[.5] .20 [5] .030 [.76] .177[4.5] .125 [3.2] .55 [14] .032 [.8] dia. .430 [10.9] [20.3] .080 [2] .020 [.5] .12 [3] MP126G .060 [1.5] .140 [3.5] MP220G, MP220GB .080 [2] .200 [5] .200 [5.08] SPECIFICATIONS RCD Type Max. Power with Heat Max Power1 Sink (25C) w/o Heat Sink (25C) <240 240 20W 20W 35W 25W 30W 50W 45W 100W 140W 10W 10W 20W 20W 20W 30W 30W n/a n/a 1.25W 1.25W 2.25W 2.00W 2.25W 2.25W 2.25W 3.5W 3.5W Thermal Resis. 2 <6C/W <6C/W <4C/W <4C/W <4C/W <2.5C/W <2.5C/W <1.5C/W <1C/W Max. Voltage3,4 300V 300V 500V 500V 500V 500V 500V (PR) (PR) Resistance Range ()4 .01 - 56K .01 - 56K .01 - 56K .01 - 56K .01 - 56K .1 - 56K .1 - 56K .1 - 240 .1 - 240 TYPICAL PERFORMANCE CHARACTERISTICS Standard Temperature Coefficient (Typ, +25C to +125C) Operating Temperature Range Std. Resistance Tol. (0.025%-5% avail) Dielectric Strength Current Rating Insulation Resistance Load Life Stability Overload Thermal Shock (Mil-Std-202 M107C) Soldering Stability Moisture Res (Mil-STD-202, M106) 50ppm 10 (2ppm avail) 100ppm 0.1 - 9.9 250ppm 0.01 - 0.99 -55 to +155C 1% .05, 5% <.05 1500VAC 30A max. 10,000 M min. 1% 1.5x W, 5S, nte 1.5x Max V 0.25% 0.1% 0.5% MP126 MP126G MP220 MP220G MPD220 MP220B MP220GB MP247 MP247B 2R 1 Power rating without heat sink is based on unit being mounted on double-sided 2oz 1" x 1" x .063" PCB. 4 Extended range available, consult factory. JC Film (J) to Case (C) 3 Voltage determined by E= (PR)1/2, not to exceed the Max.Voltage Rating P/N DESIGNATION: MP220 - 1001 - F B W POWER RATING Power rating is based on the resistor being tightly screwed to a suitable heat sink (with thermal compound) to limit hot spot case temperature to 155C. Derate W, V, A by .77%/C above 25C (as depicted in chart below). Mounting torque not to exceed 8 in-lbs. Refer to Applic.Guide R-34 for additional detail concerning heat-sink resistor mounting guidelines. 100 % OF RATED W/V/A 75 50 25 0 RCD Type Options: P, G, B, etc (leave blank for std) Resis.Code 0.025%-1%: 3 digits &multiplier (R010=.01, R100=.1,1R00=1,10R0=10,1000=100,1001=1K, etc) Resis.Code 2%-10%: 2 digits & multiplier (R01=.01, R10=0.1, 1R0=1, 100=10, 101=100, 102=1K, etc.) Tolerance Code: J=5%, G=2%, F=1%, D=0.5%, C=0.25%, B=0.1%, A=0.05%, X=0.025% Packaging: B = Bulk, T = Taped (bulk is standard) Optional Temp. Coefficient: 25=25ppm, 50=50ppm, 25=25ppm, 10=10ppm, 5=5ppm, 2=2ppm (leave blank for std) Termination: W= Pb-free, Q= Sn/Pb. Leave blank if either is acceptable (RCD will select based on lowest price and quickest delivery) 25 50 75 100 125 CASE TEMPERATURE ( C ) 150 175 RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA069B Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 78 |
Price & Availability of MP220-100-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |